Gluing magnets may be one sticky situation -- and not only literally. It is tricky to be certain that the magnet remains where it is attached, not where it is attracted. We have discovered when it comes to adhering magnets, there are 3 important actions to creating a thriving bond: planning, choice and cure period.

 

It is often overlooked, but surface prep is makes an important difference in achieving a strong surface connection between a magnet and the glue. Be sure that the top layer of the magnet is oil and dirt free by wiping it with rubbing alcohol. Magnets with sleek nickel coatings, such as neodymium magnets, usually require some abrasion to increase adhesion. A fast entry with a fine grit sand paper does the trick. Obviously, make sure you wash off any dust. Taking a few minutes to prep the magnets can save hours of aggravation in the future.

 

If you have been into the shop to buy adhesive lately, then you are aware that the choice can be overpowering. But deciding on the right glue is crucial. There are numerous excellent alternatives available, and choosing the ideal glue is dependent on the material you're affixing the magnet to.

 

For many surfaces, like wood and metal, the normal powerful adhesives like two-part epoxies, Loctite, Liquid Nails, Super Glue, and Gorilla Glue work nicely.

 

For craft projects with lightweight magnets, double-sided tape and Glue Dots hold just fine. Low temp hot glue may be used with ceramic magnets -- although maybe not with neodymium magnets. The temperature of this adhesive can diminish the potency of these magnets.

 

Plastics pose the hardest surface to attach a magnet to. Go for an adhesive specially designed for vinyl. The two 3M, E6000 and Loctite make excellent decisions.

 

As a point of view, among those mats we utilize on our neodymium magnets is a Low Surface Energy foam tape from 3M, which makes it effective for vinyl surfaces.

 

This last step is the toughest -- we all wish to check our endeavors or accelerate manufacturing, but not one of the groundwork and gluing matter should you hurry into use. Giving the glue appropriate time to heal would be the final step in ensuring that the bond stays tight. Follow manufacturer instructions to ascertain that moment. Remember that high humidity environments and too thick applications of glue down both slow heal time. For more info click custom magnets bulk

 

 

Since we are aware of the significance of adhesive, we provide a number of our magnets using a pre-applied adhesive. In our next site, we will delve into particulars the pre-applied adhesives on our elastic sheeting and strip and the way to attain successful results with those mats.